Tom Messenger wrote:

> Earlier, I asked for help getting MPLAB to function correctly on one of my
> computers (all other software *appeared* to be working ok).
>
> Yesterday, I bit the bullet and did a re-install of Win98: bingo! No
> problem. MPLAB works fine now. Something somewhere was seriously bent.
>
> My thanks to those who made helpful suggestions! As usual the piclist is
> the place to go for solutions, even uncommented ones!
>
> Tom M.>

I have been seeing "Processor could not be halted..." a LOT now.
But if I reset and "run to here" again, it often works...

And it looks like the old ASYNC port problem is back in the latest version.
BTFSC  TXSTA, TRMT and it shows the bit SET but it still skips to the next
instruction.


>
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
  *
  |  __O    Thomas C. Sefranek  tcs@cmcorp.com
  |_-\<,_   Amateur Radio Operator: WA1RHP
  (*)/ (*)  Bicycle mobile on 145.41, 448.625 MHz

ARRL Instructor, Technical Specialist, VE Contact.
http://hamradio.cmcorp.com/inventory/Inventory.html
http://www.harvardrepeater.org

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu