On Thu, 17 August 2000, Barry Gershenfeld wrote:

>
> >If I uncheck the debug option, it doesn't seem to run at all. If I check
> the debug option, then keep the cable connected, it seems to run ok.
>
> When I tried this, it took me a while for me to realize you have to "burn"
> the program again (to leave out the debug traps, I think).  Hope
> your solution is something easy like that.
>
> Barry

Barry,
How do I leave out the debug traps? I went to a menu and cleared them all but it still didn't work. ANyway, I will try some of the suggested solutions.

Jeff
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu

Jeffrey Scharpf
Senior Engineering Technician
Milwaukee Electric Tool Corporation
Technical Center
Brookfield, Wisconsin, 53005
(262) 783-8681
_______________________________________________________
Are you a Techie? Get Your Free Tech Email Address Now!
Many to choose from! Visit http://www.TechEmail.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu