---------- Forwarded message ---------- Date: Wed, 16 Aug 2000 20:43:49 +0100 From: "dave selvester" To: pic microcontroller discussion list Subject: Re: [OT]:Protel or Orcad? Hi Ian, Nice of the people at Vutrax to send a copy for free. The reason i asked the question initially was because i have just started work for a company that use it.I have never come across it before(used to orcad/protel and the like)First impressions are that the learning curve is very steep(espcially if you've never used this type of software before).Your right about it probably being a very good package when mastered,i just worry about software that isnt very user friendly from the offset!! Just wondered how poular(or unpopular it was) Cheers Dave On Wed, 16 Aug 2000 17:43:29 +1200 Ian Stewart wrote: > Hi Dave, > I tried to download Vutrax from the web site, but it kept dropping out. The > good people at Vutrax posted out a CD to New Zealand at no cost. > It is an extensive program being a CAD program as well as PCB layout. I have > found it quite hard to work with, I have drawn a simple schematic but so far > have not been able to start a PCB layout, where as I was able to use Eagle > much sooner but had to work around some tracks that I could not control. I > intend to continue the learning curve as I think it will be a good program > when mastered. > Ian > ----- Original Message ----- > From: dave selvester > To: > Sent: Tuesday, August 15, 2000 8:10 AM > Subject: Re: [OT]:Protel or Orcad? > > > > Has anybody any experience(good or bad!)of a package called Vutrax?? > > > > -- > > http://www.piclist.com hint: PICList Posts must start with ONE topic: > > [PIC]: PIC only [EE]: engineering [OT]: off topic [AD]: advertisements > > > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.