Hi Rick,

        The easiest thing to do is use enamel wire and a toroid ring, both should
be commonly available.  The toroid transformer won't need a shield.  Try
digikey or mouser for both the wire or your local electronic shop might
have it.

-Ben

At 10:52 AM 8/9/2000 -0500, you wrote:
>Hello Good People,
>
>I want to build a small transformer of my own,
>and I was wondering if anyone has a source where
>I can get some of the special wire used to wind these??
>
>I think the wire is enamel coated, I've asked this before,
>about what kind of wire is used, but I've forgotten and
>cleaned out my diskdrive too.
>
>So again, what kind of wire is it, and where can
>I get some??
>
>Thanks
>
>Also, what is the best thing to wrap the wire around?
>
>Can delrin be used??
>
>Thanks good day
>Rick
>
>ok, I've got both brackets and a freaken colon!
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
Ben Wirz                           mailto:ben@wirz.com
Wirz Electronics                   http://www.wirz.com/

SLI-OEM - The most cost effective Serial LCD available!

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu