Hi Wojtek, Hi Wouter Wouter, as you see, the same problem and other people ! Wojtek, first release of wloader it works on standard communication pins of 877 RC6 and RC7 , this is not available now from Wouter's page. As my tests on various computers and 232 interfaces ( 16450, 16550 ) shows the problem is not the interface but delays between receive and send command bit's ( and sometimes the levels of signals on Rx-Tx pic pin ) . So I thinked also at your solution...I'm currently using a non-inverting RS232 made from 1488 and 1489 tied together through a diode to PIC communication pin and a 1nF capacitor to ground. But as I told you it doesn't work correctly only on some computers ( I've tested on 5 different computers...) Vasile On 6 Aug 00, at 10:14, Wojtek Zabolotny wrote: > On Sun, Aug 06, 2000 at 01:02:29AM +0200, Wojtek Zabolotny wrote: > > > > This is the proposed interface: > > _____________ > > RS232 input ----|RIN1 ROUT1|--- PIC RC7/RX > > RS232 output ----|TOUT1 TIN1|--- PIC RC6/TX > > | | > > RS in (to PC)----|RIN2 ROUT2|---+====+--+ > > | | R1 (10k) | > > RS out(to PC)----|TOUT2 TIN2|-----------+--- PIC E2 (WLoader PIN) > > ------------- > > MAX232 > > Ooops, I've forgotten about the pull-up: > > So it should look out like this: > _____________ > RS232 input ----|RIN1 ROUT1|--- PIC RC7/RX > RS232 output ----|TOUT1 TIN1|--- PIC RC6/TX > | | > RS in (to PC)--+-|RIN2 ROUT2|---+====+--+ > R2 (4k7) | | | R1 (10k) | > +5V-|>|-+====+---+ | | > RS out(to PC)----|TOUT2 TIN2|-----------+--- PIC E2 (WLoader PIN) > ------------- > MAX232 > > -- > Wojciech Zabolotny > http://www.ise.pw.edu.pl/~wzab > > When buying any hardware, ask the dealer if it is Open Source friendly!!! > http://www.openhardware.org > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]: PIC only [EE]: engineering [OT]: off topic [AD]: advertisements **************************************** Surducan Vasile email:vasile@l30.itim-cj.ro URL:http://www.geocities.com/vsurducan **************************************** -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics