On Mon, 10 Jul 2000, Albert Goodwill wrote:

> I would like to use PIC16F84 (or PIC16F877 or  AT90S8535) to control 8 servo
> motors with PWM signals.
>
> PIC will receive serial command indicating servo motor number and PWM value
> and it will produce corresponding PWM signal for selected motor. I want it
> to produce upto 8 PWM signal simultaneously while it checks serial command
> input channel for new command.
>
>                 ================
>                |                                     |
>         ---->|Serial data in  PWM0|---->
>         <----|PWM1             PWM2|---->
>         <----|PWM3             PWM4|---->
>         <----|PWM5             PWM5|---->
>         <----|PWM7             PWM_|---->
>                |                                     |
>                 ================
>                ________________
>
> Is there such an application code on the net?
>
> albertgoodwill@yahoo.com

Did you see:


http://www.dattalo.com/technical/software/pic/pwm8.asm

?


Scott

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics