This is a Question that is often asked All the recent stuff about Noise in power supply applies here as well but with wirewrap there is a few extra precautions needed Regards Art ----- Original Message ----- From: marius bratrein To: Sent: Wednesday, July 05, 2000 10:49 PM Subject: [EE]: Wirewrap ? > For those experienced wire-wrappers: > > Do you use thicker wire for the supply lines (vcc, gnd etc) than the > regular wire used for signals ? Yes 25g as to 39g but run Supply Wiring at 90 degrees to signal use loads of caps values 0.1u and 0.01u Do not run signal round posts to form neat cable runs random point to point works better but not as neat. > I am trying to eliminate noise sources on my (wire-wrapped) board, and I > am afraid that my suppoly lines are switching to fast for the wire I am > using. > > Thanks > > Marius > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics