Pre-emptive ADMIN strike....

Further posts on this topic related to moral or ethical questions should be
marked [OT]: rather than [PIC]:

Thank you for caring about the PICList

---
James Newton (PICList Admin #3)
mailto:jamesnewton@piclist.com 1-619-652-0593
PIC/PICList FAQ: http://www.piclist.com or .org

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Don B. Roadman
Sent: Wednesday, July 05, 2000 11:29
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]:: MPLAB ICD with a 16F873 (?)


On 5 Jul 2000, at 14:53, Edson Brusque wrote:

> Hello,
>
>     I have an MPLAB ICD, the one with PIC16C73. I have a bunch of
>     PIC16F873,
> and would like to use the new ICD software that cames with the last
> MPLAB, it's on the file MPL876.HEX IIRC, but it's for an 'F876.
>
>     I've noticed that the .HEX have a lot of holes, so I think an
>     'F873
> would be enough to run it. Have anyone here modified the .HEX (or have
> access to the .ASM) so it can run on an 'F873?
>
>     Thanks,
>
>     Brusque
>
>
Interesting. I'm using an 877 instead of the 876 they specify. It will
be interesting to see what happens with your substitution. Of
course, you do know that all this is un-ethical, and its morally
wrong, but I guess we are doing it anyway, huh?  Maybe Jesus or
Mohammed or Buddha or somebody will forgive us our trespasses.
Nah, they got inside info, and are too busy coding for the new
19Fxxx series. :) :) :) :) :)

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]: PIC only [EE]: engineering [OT]: off topic [AD]: advertisements

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]: PIC only [EE]: engineering [OT]: off topic [AD]: advertisements