You're going to have to bit bang the data out to the device. It's not too
difficult. There are some source code snippetts
on the net. If you have trouble finding them let me know

Joe

----- Original Message -----
From: Bato Vukovic <bvukovic@TIREUM.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, May 30, 2000 12:51 PM
Subject: I2C TO I2C SERIAL EEPROM, HOW TO DO IT


> SINCE THE MID RANGE PICS CAN BE ONLY CONFIGURED IN SLAVE MODE HOW DO
> OR CAN I HAVE A PIC USE A I2C SERIAL EEPROM.?
>
> THANKS IN ADVANCE
>
> Mr. Bato Vukovic B.Eng.
> Project Specialist
> 56 Pennsylvania Ave Unit #10
> Vaughan, Ontario
> L4K-3V9
> Work: (905) 761-3393 ext. 228
> Cell:   (416) 895-8350
> Fax:   (905) 761-3396
>