At 08:22 PM 5/25/00 +0530, you wrote:

Thank Ravi, this is right on. The 28-pin Zif is only for the 16C55/57 and
the 18-pin ZIF does the 16C52/4/56/58 and on some firmware vintages the
24C, 25C, 93C and 59C serial eeproms.

BTW. Anyone can download the software driver and HELP file from my web page
if
they are interested further.

http://www.new-elect.com/downloads.htm

Regards,

Jim

>The 8 pin devices are floated on the 40 pin socket.
>
>Run the warp 13 driver and click on WHERE PIC. You will get a picture.
>
>The blank unpopulated areas are for the 16C5x 18 pin and 28 pin parts.
>
>Pailoor
>
>--
>********************************************************************
>* e-CHIP INFOTEK (P) LTD.                                          *
>* Microchip Consultant                                             *
>* 6/1 Crescent Road, Bangalore 560001, INDIA                       *
>* Tel 91 80 2202172, Fax 91 80 2258103, Mobile 98440 81538         *
>*------------------------------------------------------------------*
>* We design the future with PICmicro                               *
>* http://echipinfotek.com                                          *
>*------------------------------------------------------------------*
>* All attachments will be listed above. If you find any additional *
>* attachment, it could be a virus, please delete it and inform me. *
>*                                                                  *
>* Thanks                                                           *
>********************************************************************
>Attachment Converted: "C:\PROGRAM FILES\INTERNET\EUDORAP\ATTACH\chiptech.vcf"
>
Regards,

Jim Robertson
NEWFOUND ELECTRONICS
________________________________________
Email: newfound@pipeline.com.au
http://www.new-elect.com
MPLAB compatible PIC programmers.
________________________________________