----- Original Message ----- From: "Andrej Vuga" To: Sent: Thursday, May 25, 2000 5:47 AM Subject: PIC ICD > Hello! > > I'm thinking of buying a MPLAB ICD (in circuit debugger), because I want to debug code for 16F873. > Does enybody remember, which PIC microcontrollers does the package contain (which chips do you receive in the package). > > I'm asking this because in the Microchip aplication note 51184b.pdf (page 23 of the manual) it's written, that for emulating the 16F873 you need a 16F874 attached to the header. > > Thanks for the answer > Andrej Vuga > > _______________________________________________________________________ > > Why pay when you don't have to? Get AltaVista Free Internet Access now! > http://jump.altavista.com/freeaccess4.go > > _ The one I got came with a 16f877 on the demo board which connects to the ICD board with a 6 wire modular cable (supplied). The demo board has both 40 and 28 pin sockets and the header board which has a socketed 16F877 plugs into the 40 pin socket on the demo board. The header board also has a modular connector. Dan Mulally_____________________________________________________________________