>         I'm planning to LAN (peer to peer) 5 computers (all
> pre-loaded with
> windoze 98)and then share net connection via ICS. Which do you think in
> your experience is better 10base2 or 10baseT...What are the advantages
> of each versus the other?

        Pretty simple, 10base2 is cheaper to wire since you don't need a hub. In
some circumstances it makes more sense using this type if your computers
form a long line, the disadvantage is if there is one bad connection or NIC,
the WHOLE network goes down.
        10BaseT is much better for non linear type computer configs. It is more
expensive to start since a network with more than two computers always needs
a hub. However, if there is a bad connection or NIC it will only affect the
one computer involved. Hope this helped, TTYL