John wrote

> Hi Tony,
> All I/O is accounted for and power supply is OK, nothing going into OCS2 but
> XTAL. They both programmed and veryfied OK.
>
I would reiterate the afore mentioned posts, it is very
likely the power supply on the target is reversed OR you
have a major common (zerovolts) mismatch between
parts of the project.

Note: (I am trying to help not be a swine) but VDD is +ve
and VSS is 0volts. I have seen people get this mixed up.




_____________________________

Lance Allen
Technical Officer
Uni of Auckland
Psych Dept
New Zealand

www.psych.auckland.ac.nz

_____________________________