Giles

Thank you for the offer. My questions:

I have had excellent results making my own PCB's using a product called
Positiv 20 from Kontakt Chemie. (0.2mm traces no prob.) The problem I do
have is that the film distorts going through the laser printer making
alignment of the larger double sides PCB's nearly impossible. How do you
guys overcome this problem? What film do you use? What laser printer?

Your advice would be much appreciated

Stephan

----- Original Message -----
From: Giles <programmer1@HOTMAIL.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, May 02, 2000 7:06 PM
Subject: [OT] Film and layout for PCB


> I know many people on this list are trying to make PCBs by what ever home
> PCB fabrication they can think of.
> At my office, we do film work for PCBs, and if you found that a printout
on
> laser printer is not opaque enough or does not have the resolution needed,
> perhaps I can help.  The guy in my office who does film work will be happy
> to help a hobbies out (as long as they are not demanding)
> As for PCB layout, I will be glad to help on simple designs. (if you know
> what you want)
>
> Anyway, we will be willing to help for free as long as we have some spare
> time.
>
> e-mail me at my other e-mail account if you are interested
> giles@onecorpsource.com
> (my hotmail account is too piclist active to check everything)
>
> Best regards,
> Giles