> Anyone can help to point me a source or sources to get 50MHz suitable
> for Scenix chips?  Scenix FAQ states that 3rd tone type is not that
> suitable, anyone has problems or success with that?

A 50MHz fundamental crystal isn't cheap. If you really want to spend
US$10-20 per unit, let me know. I have some sources filed away
somewhere.
That's interesting that they say an overtone type isn't that
suitable. Reading between the lines it infers to me that they expect
a lot of support calls if you try and use them. An overtone crystal
isn't that hard to use but unless you actually need the timing
qualities, the ceramic resonators from Parallax (or Murata for qty)
are your best bet.
If you need the accuracy, I'd look seriously at canned oscillators.
You know they are going to work.

Steve.

======================================================
Steve Baldwin                Electronic Product Design
TLA Microsystems Ltd         Microcontroller Specialists
PO Box 15-680, New Lynn      http://www.tla.co.nz
Auckland, New Zealand        ph  +64 9 820-2221
email: steveb@tla.co.nz      fax +64 9 820-1929
======================================================