Hi
/20 = 0-20 Mhz not 200 Khz
/04 = 0-4 Mhz

and yes they can run at 32,xxx Khz
regards Henrik
www.icelektro.dk

----- Original Message ----- 
From: "Jeremy Miller" <jeremill@PRAIRIE.NODAK.EDU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Saturday, April 15, 2000 6:00 AM
Subject: Different speed parts


> Several different varieties of each part number are sold, such as
> "PIC16C622-04" or "PIC16C622-20".  My question is: can these parts be
> programmed for LP mode?  I am going to run one at 32.768khz, and the
> 0-200khz parts are slightly more expensive, not to mention I only have the
> 0-4Mhz parts on hand.  It would seem to me that this should be no problem,
> since the /JW parts supposedly use the exact same die.
>