Alice Campbell wrote:
>
> hmm, good thought.  Now is there a nice way to terminate all
> those lines?  i dug out some 10k sip resistors, but of course
> the 40-odd pin connector on the mchip project board is not
> set up to plug them in directly, and i have to be careful
> with port b because of b3, b6,and b7..
> Is there an easy way to terminate all the loose lines without
> doing something to the project board i will regret later when
> it comes time to tear it out?
> a.

Leave them set as unconnected outputs.

The prototype board can have a spare pin (hole) next to each unused port
pin for later connection if required.

--
Best regards

Tony

http://www.picnpoke.com
mailto:sales@picnpoke.com