In-Reply-To: <NDBBIAIGCKGNICIKFOIFGEFBCCAA.dolson@progress.com>

"David E. Olson" <dolson@PROGRESS.COM> wrote:

> a reasonable period to duty ratio. Problem is that lowest values are a 255
> period and 127 duty, I get around 230Hz. I'm not using the full 10 bits on
> the PWM since I can't get the period low enough to make a difference. The

As far as I know all you can do is run the whole PIC at a lower frequency. It
would need to be 10 times slower than you are running it at present.

Brian Gregory.
briang@cix.co.uk