Where can I get the latest firmware for the ICD? Is it included with the MPLAB 5.0 distribution? John C. At 10:32 PM 3/26/00 -0500, you wrote: >You might be interested to know that the tutorial program has an >intentional error, to help you understand the capabilities of the ICD. >Read the manual, they have a whole section on the tutorial, and the ICD >functions they use to 'trouble-shoot' the error. Then they list the >'fixed' tutorial program in the manual at the end of the section. > >-Adam > >K|bek Tony wrote: > > > > Hi, > > bought Mchip's ICD a while back but haven't had time ( our any Pic > > projects for that matter ) to > > give it a whirl. Anyway, updated the icd firmware to 2.04 ( and changed > > to an 876 ) and it seems to work ( no warnings ). > > Decided to try out the example in the user guide 'tut877.asm' found on > > the mchip's website. > > ( actually in the user guide it's called 'demo877.asm' ). > > I've setup the configuration bits as they should, running on the demo > > board accompanying the > > ICD, so RC, LVP-OFF, WDT-OFF etc. > > Compiles and programs ok > > Stepping/running works UNTIL the following lines: > > > > Wait > > btfss PIR1,ADIF ;Wait for conversion to complete > > goto Wait > > > > Where it remains, i.e. the A/D conversion is never finished ? ( it loops > > here forever, if I halt > > the execution, all registers are updated etc. so it seems that the ICD > > is running ok ). > > > > Why is that ? > > Glanced through the code and didn't see any obvious misstakes so haven't > > got a clue > > to why it doesnt work. Anyone else have any ideas ? > > > > /Tony > > > > Tony K|bek, Flintab AB > > 222222222222222222222222222222222222222222222222222222222222 > > E-mail: tony.kubek@flintab.com > > 222222222222222222222222222222222222222222222222222222222222 John A. Craft (601)689-8100 Voice Lead Analyst (601)689-8130 Fax Diamond Data Systems of MS, Inc. http://www.diamonddata.com MSAAP Bldg 9110 jcraft@diamonddata.com Stennis Space Center, MS 39529