Mark Newland wrote:
>SUMMERY:
>I hear alot of people on hear talking bad about Microchip and say they
>are going over to Scenix (greater speed, built in emulator, etc.).  I
>also hear the devout PIC users that say that Scenix is too limited in
>what they offer (program space, A/D, different types of families, etc.)
>and stay with the PIC's.  I think this is an great example of the need
>to be flexible and diverse.  I for one will use BOTH!!!
>

Mark,

I am here to concur with you. My last project used both a PIC16C76
and an SX28, exploiting each for its maximum benefit. I used a little
multidrop RS-232 bus, so both can talk to a host PC on the same line.
[If only the dang SX had more RAM].

BTW, in your case, did you possibly try running the SX as a
non-VP, using the hardware interrupts?

best regards,
- Dan Michaels
Oricom Technologies
http://www.sni.net/~oricom
==========================