Peter van Hoof wrote:
> I have a bag of the ZTT-20.00MT ones (digikey partno:X909-ND) that I use
> on the 16f877 with 100% success. I use the HS oscilator mode.(highest gain)
> Peter

> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Marius Bratrein

> Subject: acceptable resonators for PIC MCUs
>     Does anyone have experience using a ceramic resonator at clock speeds
> greater than 16 mhz?  Can anyone tell me which resonators will work?  I
> have tried an ECS ZTT series 20mhz resonator, but as far as I can tell,
> the PIC does not have enough gain to drive it.  Thanks

I know Jim at Newfound has tried the ZTT-20.00MT in his proto warp-xx
for 876's and had it working fine.

I just got bags of them from 4mhz right up to 20mhz (they don't
manufacture higher frequencies), so I'm sure I will find out very soon.
:-)

Be interesting to see how they go on AVR's also.

Don McKenzie    mailto:don@dontronics.com      http://www.dontronics.com

World's Largest Range of Atmel/AVR and  PICmicro Hardware and  Software.
Free Basic Compiler and Programmer http://www.dontronics.com/runavr.html