http://www.microchip.com/10/Lit/Specs/index.htm
Has all the microchip documents on programming their micros.

-Adam

"John A. Craft" wrote:
>
> >The cable I was speaking to above was a cable to the parallel port. The
> >LVP buys you the ability to program without having a high voltage supply
> >in the equation. This means that you should be able to build a cable that
> >plugs into the parallel port that programs the part in a traditional manner
> >without having to deal with a Vpp to MCLR. So instead of Tait design that
> >specifically generates a Vpp, all you need is a cable for the programmer.
> A cable to the parallel port??
>
> Is there document somewhere that describes LVP programming?
>
> John C.