Hi All,
        I'm just starting with PIC16F64
Could someone give me some  'basic' do's and dont's and "lore" in
the use of these Beasties B4 I start burning.
 Is there an FAQ for Hardware interfacing ? covering simple things
like protecting the I/O pins from sinking/sourcing too much current
etc.
 final queries for today.;-)  re; Dontronics DT101 board..

the DT101 brownout cct.. I don't have one of these beasts, would
the following be ok..component designation as per DT101..
R1=10k paralleled with 1n4148 to vdd, R2= 330r, and 0.1uF between
junction of R1/R2 to vcc. values approximated from DS30430c page
43.
 I have a 24C02-MB in SO package, will this replace the 24LCxx
eeprom as specified..if used in an SO to DIP carrier?.

Many thanks Mike W.. and also thanks for the sig file :-)


--
Life is dark and empty for the PIC developer without an ICE.
( Lance Allen, ad2000 )