>From the news.cadsoft.de news server, eagle.support.eng:
"
From: "Ed Robledo" <ed@cadsoftusa.com>
Subject: Re: How to create a single layer PCB
Date: Friday, January 28, 2000 11:22 AM

Hi,
Place this file in the same directory where you board is located. Change the
name to match the name of your file, leave the current extencion .CTL.
When you run EAGLE and load the autorouter screen you will notice the
changes.

Hope this helps.
Ed

"A.C. de Cocq" wrote:

> I found "1layer.ctl"in the cadsoft website, can anyone tell me how to
> implement this in to Eagle?
>
> Thanks
>
> A.C. de Cocq heeft geschreven in bericht
<86l4l8$lm8$1@tiger.cadsoft.de>...
> >Can anyone tell me how I can create a slingle layer PCB by using the
> >autorouting function of Eagle 3.55?
> >The problem is that I cannot manually create double layer PCB's.
> >I would like to have information about which settings I have to use in
> order
> >to create a single layer PCB.
> >
> >Thanks in advance,
> >A.C de Cocq.
> >
> >

--
***********************************
Edwin Robledo
CadSoft Computer, Inc.
e-mail    :  ed@cadsoftusa.com
Tel       :  561-274-8355
Fax       :  561-274-8218
URL       :  www.cadsoftusa.com
NewsGroup :  news.cadsoft.de
***********************************

 "

I'm an Eagle newbie myself, and have not tried this yet.

Peter


----- Original Message -----
From: "Anthony Clay" <zarthrag@INTCON.NET>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Saturday, February 26, 2000 6:21 PM
Subject: Eagle CAD[OT)


> I'm sorry to have to post yet another OT thread.  But I know this list has
> several Eagle CAD users.  But the question is really simple.  I have made
my
> schematic, but when I use the autorouter, it gives me a setup for a double
> sided PC-Board.  How do I create single sided boards?
>
> Anthony Clay
> zarthrag@intcon.net
>