> I have just purchased 3 of these displays and they seem excellent
> value. At present all I have done is to apply power and run the self
> test. Can anyone tell me what the signalling levels are for the serial
> connection. I am a bit worried about using +/- 12V RS232 or even +/-
> 5V. Should it be 0v and 5V ? There is nothing in the Data Sheet to
> tell me.
>
> Thanks
>
> Mike
>
Hooked one up to a BASIC STAMP. Rather easy. Used
Noninverted mode(as though you were connecting to a line driver).
Comes as 1200 baud but can be set with J1&J2 to 2400,4800,9600.
Set pin to high then TRIS to out first thing to prevent glitch
character on reset. I paused 50mS after to let it settle after power
up.