I've been looking for a midium range transmiter (50yards) for a while. I was
wondering if you could send me the diagram of your transmitter
Best Regards
     Ren

ICQ #31030202


----- Original Message -----
From: Philippe L. <philippe.luc@maisel-gw.enst-bretagne.fr>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, February 10, 2000 4:10 PM
Subject: Re: key transmitters


> Hello,
>
> I am working on something like that right now !
>
> The aim of my project is to transmit 7 bytes with Aurel transmiters @ 1200
> bps
>
> I use one pic for the emeter and an other for the receiver. I don't use
> other components (except the rf modules !).
> After the bytes are in the receiver's memory, you do what you want with !
>
> It works quite fine but the receiver need some improvement in order to
> decode the code even if the emeter is far.
>
> I planed to make a web page about that when I manage to make a good code.
>
> But if somebody wants the draft code (which works !),  just ask me !
>
> Philippe
>
> Sorry for my english, it's not my natural langage...
>
>
> ----- Original Message -----
> From: Peter McAlpine <mcalpine@GME.NET.AU>
> To: <PICLIST@MITVMA.MIT.EDU>
> Sent: Thursday, February 10, 2000 10:57 PM
> Subject: key transmitters
>
>
> > Hi all,
> > I need to build a transmitter / recevier that sends
> > a data code, with the transmitter being a keyfob
> > type (aka remote entry on cars).
> >
> > Anyone point me in the direction of any circuit ideas
> > on this?
> >
> > Also, the Microchip keyloq device with code hoping,
> > can it send a unique data code that can be passed
> > through to another micro on decode? I need
> > multiple users with different codes to unlock
> > a device, and log who used it.
> >
> > Thanks!
> >
> > Regards
> > Peter Mcalpine
> > www.ozemail.com.au/~petermca
> > www.wrx.org.au
> >
>