Oh in that case there are plenty.
Just go to http://www.seiko-usa-ecd.com/lcd/html/
and find your LCD.  Follow their instructions!

GL,
Walt....


-----Original Message-----
From: Andrew T Kelley [mailto:k_andrew@JUNO.COM]
Sent: Tuesday, February 08, 2000 2:07 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [OT] Unidentifiable display


OOPS...
I meant 14 pins TOTAL... :(
7pins per row!
dual row.

I bought two at a hamfest for $5 a piece...

the backlight is two separate terminals.

Andrew


On Tue, 8 Feb 2000 12:57:02 -0800 "Quitt, Walter" <wquitt@MICROJOIN.COM>
writes:
> I have the Seiko documentation.
> I'll look at it.  It describes
> several of their configurations.
> If it does have a backlight, then
> it may not have the readback function
> pin.  But, I just looked and counted
> pins again and find it hard to believe.
> I have several LCDs hanging around.
> Maybe it is one with no E line.
> Dunno.  Will review.
>
> Can you get more??? Cheap?
>
> Walt...
>
> -----Original Message-----
> From: Andrew T Kelley [mailto:k_andrew@JUNO.COM]
> Sent: Tuesday, February 08, 2000 12:24 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [OT] Unidentifiable display
>
>
> It has a backlight... DC I assume since it has A and K marks.
> Two rows I think...twenty chars...I hope :)
>
> Andrew
>
> On Tue, 8 Feb 2000 11:58:44 -0800 "Quitt, Walter"
> <wquitt@MICROJOIN.COM>
> writes:
> > Sounds like a standard LCD with no backlight.
> > The pinout is as described in numerous places.
> > You'll have to write a test routine to find out
> > how many rows and columns.  I'll guess 1 or 2
> > rows.  Depending on the size you can guess
> > columns too.
> >
> > GL, Walt...
> >
> > -----Original Message-----
> > From: Andrew T Kelley [mailto:k_andrew@JUNO.COM]
> > Sent: Tuesday, February 08, 2000 11:21 AM
> > To: PICLIST@MITVMA.MIT.EDU
> > Subject: [OT] Unidentifiable display
> >
> >
> > I have an unindentifiable display.
> >
> > It has the markings:
> > 94V0
> >
> > and is made by Seiko Instruments.
> >
> > I cannot find any data on it.
> > It has a 14 pin dual row connector on it.
> >
> > And the HD44780 controller and a HD44100 controller.
> >
> > Any/all help is appreciated,
> > Andrew
> >
> > ________________________________________________________________
> > YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> > Juno now offers FREE Internet Access!
> > Try it today - there's no risk!  For your FREE software, visit:
> > http://dl.www.juno.com/get/tagj.
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.