Hi Alice,

What xtal freq. is this meant for? I count 551 cycles for the inner loop,
so it would be around 2.2 Mhz as far as I can see. Is that right?

Sean

At 12:08 AM 1/25/00 PST, you wrote:
>;------------------------------------------
>;call with no. of ms in work
>delay_xms               ;uses temp, temp1  check for reg. conflicts
>        movwf   temp1   ;1      # ms in work
>ms_dely
>        movlw   .110    ;1  for fast crystal makes 1 millisecond
>        movwf   temp    ;1
>dlylp   clrwdt                   ;1pretty short duty cycle i use wdt a lot
>        nop             ;1
>        decfsz  temp,f  ;1
>        goto    dlylp   ;2
>        decfsz  temp1   ;1
>        goto    ms_dely ;2
>        return
>;-------------------------------------------------------------
>alice
>
>
>

|
| Sean Breheny
| Amateur Radio Callsign: KA3YXM
| Electrical Engineering Student
\--------------=----------------
Save lives, please look at http://www.all.org
Personal page: http://www.people.cornell.edu/pages/shb7
mailto:shb7@cornell.edu ICQ #: 3329174