Public snub?  I didn't get his message on the list...  It looks to me as
though he sent you a private message.

I hope that wasn't the reason for your leaving the list...

-Adam

Barry Coram wrote:
>
> Yes Thanks for that...nothing like a nice public snub for my errors. Goodbye
> and enjoy your list....Barry
>
> ----- Original Message -----
> From: James Newton <jamesnewton@piclist.com>
> To: <piclist@BAZCOR.FREE-ONLINE.CO.UK>
> Sent: Wednesday, January 05, 2000 7:16 PM
> Subject: RE: LCD's again -EPSON EA-X200 25AR 18 connection module -info
> request.
>
> > Thanks for participating in the PICList; we appreciate your questions
> > and posts. We (and many of our readers) would really appreciate it,
> however,
> > if you would post in "Plain Text" rather than in "HTML" or "Rich Text".
> See
> > http://www.piclist.com for detailed instructions on how to do this.
> >
> > Thanks in advance!
> >
> > James Newton (PICList Admin #3)
> > mailto:jamesnewton@piclist.com 1-619-652-0593
> > PIC/PICList FAQ: http://www.piclist.com
> >
> > -----Original Message-----
> > From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On
> > Behalf Of Barry Coram
> > Sent: Wednesday, January 05, 2000 8:24 AM
> > To: PICLIST@MITVMA.MIT.EDU
> > Subject: LCD's again -EPSON EA-X200 25AR 18 connection module -info
> request.
> >
> >
> > Hello,
> > Thanks for your time..I have a few LCD display modules, probably 2-line x
> > 20char.
> >
> > Label says EPSON EA-X200 25AR  8909D8. It has but one chip on the board
> > marked SED1300F and has an 18 hole connection consisting of 2 rows of 9
> > holes.
> > Stamped on the PCB is KS-92 and P3000002500.
> > Any info would be much appreciated especially if it can be connected up
> and
> > drive using the 'normal' PIC LCD routines.
> > Thanks again .. Barry
> >
> >