Yes Thanks for that...nothing like a nice public snub for my errors. Goodbye and enjoy your list....Barry ----- Original Message ----- From: James Newton To: Sent: Wednesday, January 05, 2000 7:16 PM Subject: RE: LCD's again -EPSON EA-X200 25AR 18 connection module -info request. > Thanks for participating in the PICList; we appreciate your questions > and posts. We (and many of our readers) would really appreciate it, however, > if you would post in "Plain Text" rather than in "HTML" or "Rich Text". See > http://www.piclist.com for detailed instructions on how to do this. > > Thanks in advance! > > James Newton (PICList Admin #3) > mailto:jamesnewton@piclist.com 1-619-652-0593 > PIC/PICList FAQ: http://www.piclist.com > > -----Original Message----- > From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On > Behalf Of Barry Coram > Sent: Wednesday, January 05, 2000 8:24 AM > To: PICLIST@MITVMA.MIT.EDU > Subject: LCD's again -EPSON EA-X200 25AR 18 connection module -info request. > > > Hello, > Thanks for your time..I have a few LCD display modules, probably 2-line x > 20char. > > Label says EPSON EA-X200 25AR 8909D8. It has but one chip on the board > marked SED1300F and has an 18 hole connection consisting of 2 rows of 9 > holes. > Stamped on the PCB is KS-92 and P3000002500. > Any info would be much appreciated especially if it can be connected up and > drive using the 'normal' PIC LCD routines. > Thanks again .. Barry > >