At 09:52 AM 12/28/99 -0800, Erik wrote: >The first thing I'd try is taking out those first comments. They should be >ok, but something to try. Also make sure that you close the file in >whatever you are editing it in. I few days ago I had similar symptoms >(i.e. no symptoms), and through experimentation I found that it was due to >the file still being open in Excel. When I closed the file it worked. > >Also, make sure your stopwatch is reset to 0, as the file is keyed off of >this. 1. Removed all vestiges of comments. 2. Close files. 3. Selected pin stimulus file. 4. Zeroed stopwatch. 5. Reset simulator. 6. Stepped (F7) until clock 50. Result: GPIO doesn't change except for bit 0 complementing in program. Q.Is there some kind of special alignment in the .STI file? E.g., tabs, spaces, particular columns? Q. Has anyone gotten this to work? ================================================================ Robert A. LaBudde, PhD, PAS, Dpl. ACAFS e-mail: ral@lcfltd.com Least Cost Formulations, Ltd. URL: http://lcfltd.com/ 824 Timberlake Drive Tel: 757-467-0954 Virginia Beach, VA 23464-3239 Fax: 757-467-2947 "Vere scire est per causae scire" ================================================================