Yesterday I posted serial9.zip but it was 5AM and I was
a little dizzy. Then I wrongly coded the Tx to send MSB first.
I apologize for this and to clean things up I corrected the Tx
code and changed the timing to 10MHz to easy Hamish play.
Follows serial9a.zip.

MC & HNY
JSouto

Hamish Moffatt wrote:

> I am searching for an RS-232 serial receive routine
> which supports parity. The received data occurs in
> short bursts at regular intervals, so some sort
> of buffer is probably required also. The code in
> MicroChip AN555 receives some characters OK but
> loses over 50% of them for me. The data rate is
> 9600, and the clock rate is 10MHz (PIC16F84).
>
> Myke's code at www.rentron.com does not support
> parity, nor do some of the others I've seen on the
> net. I did not have any luck extending them.
>
> Thanks for your assistance,
> Hamish

Attachment converted: wonderland:serial9a.zip (pZIP/pZIP) (000124A0)