The two biggies in that field are:
http://www.serpac.com/layout/main/index.html and
http://www.pactecenclosures.com/

You can buy the Serpac boxes at:
http://www.digikey.com/

You can buy the Pactec boxes at:
http://www.mouser.com/


-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of John Hansen
Sent: Sunday, December 19, 1999 9:12 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: Good Source for Enclosures?


I need to buy plastic enclosures with a 9 volt battery compartment for my
latest PIC project.  I'll be buying in roughly quantity 25 at a time.  I'm
amazed that I can't seem to find anything much cheaper than my local Radio
Shack.  The sell an IR Transmitter Project case that is 2.75 x 4.6 x 1 for
$5.30.  Digikey has a similar box in quantity 25 for about $5 each.  Can
anyone suggest a less expensive source?  BTW, if it happened to be precut
for a standard telephone keypad that would be fabulous, but I assume this
is too much to hope for.

Thanks in advance for any leads.

John Hansen