John Mullan wrote:
>
> OK Don, I'll take your word for it.  But if I use the Tx/Rx pins on the
> 89C52 is that the same as hooking on Pin 2 & 3 of the 20pin guys???
>
> And how about the SCL/SDA.  Are PD5/PD6 equivilent on the 89C2051??
>
> John Mullan

> Subject: Re: Stamp like software for AT89C52???
>
> SShhhhhh!!!
> Don't tell any one, but it will work on the whole 8051 family.
> I can verify that this is 100% OK if you wish.

Now you are trying me out. :-)
I'll forward this to the Author in private email, not via the list.

Don McKenzie  mailto:don@dontronics.com http://www.dontronics.com

World's Largest Range of Atmel and PICmicro Hardware and Software
StampStick 32K EEPROM Basic http://www.dontronics.com/tiny51.html