Hi,
    Radio-Shack may still sell a flux remover.  They are not as available as
they used to be due to the Freon in them.   Depending on the flux, Rubbing
(Isopropl) alcohol sometimes works.  I seem to recall that ethyl alcohol worked
better, but it costs more and is not as easy to get.  It might be cheaper to
buy some 100 proof Vodka ( cheap stuff, not Stoly) , kind of a joke, but it is
cheaper than the flux removers, and you can always use it if it doesn't work on
the flux.
.

Regards,
    Dave

Jon Petty wrote:

> Hi
>
> I was wondering what should be used to cleanup a board after using  surface
> mount solder paste. After soldering there is a sticky residue  and still
> small amounts of paste still on the board.
>
> Anything readily available from the hardware store or is it a specialty
> solvent?
>
> Thanks
>
> Jon