no I didn't ; _______ _______ ; | \/ | ; Vdd --+ 1 << >> 8 +-- Vss ; | | ; Clock --+ 2 << >> 7 +-- disable signal (gpio0) ; | | ; LED --+ 3 >> 6 +-- data stream (gpio1) ; | | ; (gpio3) Reset --+ 4 << >> 5 +-- gate output (grio2) ; | | ; +-------------------+ boot pin2 pin7 | | movlw b'11101111' ; sets all pin as inputs exept pin 3 tris GPIO ;turns led on bsf led ----- Original Message ----- From: Meric Ozcan To: Sent: Wednesday, December 01, 1999 10:55 AM Subject: Re: led won't turn on Well you select the pin 4 as output...Your binary number is backwards... Meric >boot > movlw b'11101111' ; sets all pin as inputs exept pin 3 > tris GPIO ;turns led on > bsf led ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1