On Tue, 30 Nov 1999 10:48:06 -0800 "Quitt, Walter" <wquitt@MICROJOIN.COM>
writes:
>Be aware that MPLAB 4.12.12 is an interim release.
>I had to go back to 4.12 because the __CONFIG directive
>would always be loaded at location 0 (zero.)  That's
>bad and causes all sorts of problems.  That was for
>a 17 series part.  Maybe the 16s are not doing that.
>But, if it is telling you that you have no configuration
>word, most likely the default word is what you are
>using.  That is usually a bad thing.  I figgered
>the problem by looking at the map file.  You are
>generating a map file aren't you? :-) :-)  They
>really are only useful when you have these sorts
>of problems.
>
>

        I've also had problems with the config directive on the 18c452.  Still
working on getting the oscillator to go into HS mode!

Harold

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.