Unusual one here;  I need some tiny PCB's, sizes like 10mm x 12mm or so,
for little adapters.  The first two aren't PIC-related, so I marked this
OT, the third one will be though, if I can get there from here.

I need about 1mm trace widths, double-sided boards, only 10 traces per
board or so, minimal VIAs & holes.  I could do it by hand, but would
rather NOT.  Really simple boards, just using PCB's for speed & accuracy
& to avoid having to crimp thousands of connector pins <G>  Don't need 4
mil traces on this one, & want it to be fairly cheap.

Is anyone on the list able to just plain make these for me, for a
reasonable number?  I need some soon, more later, and don't really want
to do all these via hand drawing, if I can avoid that;  I can do
drilling & cutting etc., if someone wants to take on this via a couple
sheets of those laser toner resist kits, and etch the board & tin it
(preferably.)  I figure one 6"x6" panel or so will last me for a while.

  Mark

--
I do small package shipping for small businesses, world-wide.