This still swaps around drive letters when booting from one or the
other HD, which means that my paths are different when booting of the
DOS HD from when booting of the W95 HD.

>
> Ruben:
>
>    I connected a DPDT switch to the master/slave jumpers on the drives.
>
> Switch up: drive 0 = master = boot, drive 1 = slave
> Switch down: drive 1 = master = boot, drive 0 = slave
>


==============================
Ruben Jvnsson
AB Liros Elektronik
Box 9124, 200 39 Malmv, Sweden
TEL INT +4640 142078
FAX INT +4640 947388
ruben@2.sbbs.se
==============================