>> I've got a 24C16 "programmer" here, that takes it's current from the
>> Printer-port.  I just wired 3 output-pins together thru BAT 85 diodes (0.3
>> volts voltage-drop).  Other parts are two  BAT 85 diodes to create two
>> Open-collector outputs (for SDA & SCL) , and two 10 K-ohm resistors as
>> pull-ups.  The whole "circuit" is build into a connector, just leaving 4
>> threads going to my "adapter" ( a simple IC-socket ).  It has not failed me
>> yet !
>>
>> I have allmost the same programmer which can program 24xxx but use the
>> seriell-port instead. It takes the current from the port. With some changes
>> it's a variant of the well known COM84-programmer which can program PIC16x84.
>> The software I use is PIP02.
>
>If you want the circuit i try to explain it for you.
>
>/PEK
>

Ive done the serial programmer writing the software for the parallel programmer
seemed easier to me so thats what i did.  But thanks anyway

Send someone a cool Dynamitemail flashcard greeting!! And get rewarded.
GO AHEAD! http://cards.dynamitemail.com/index.php3?rid=fc-41