>         Just a quick question, does anybody know where to source some small
> geared motors either DC or stepper. I'm after a speed between 10 rpm -
> 60rpm.  If you can help I would appreciate it. I can find them here in
> Australia but they are to expensive. eg.....$160 up.  Want the gear box for
> a high torque.
>
> What would be good is motor with gearbox head type assembly.....eg all one
> unit

You don't say what sort of quality or quantity you are after. Also
"small" is a relative term.
Tamya used to sell a dc motor about 1" in diameter with a stackable
planetary gearset. You put on as many as you need, down to about
1rpm and as much torque as the plastic could stand. Cost about AU$10
from memory.

Steve.
======================================================
Steve Baldwin                Electronic Product Design
TLA Microsystems Ltd         Microcontroller Specialists
PO Box 15-680, New Lynn      http://www.tla.co.nz
Auckland, New Zealand        ph  +64 9 820-2221
email: steveb@tla.co.nz      fax +64 9 820-1929
======================================================