Can the NOPPP be used on other pics besides the PICx8x series if you simply
change what pins get's power, MCLR, serial in and serial clock or does it
take more than that to program another pic chip?

Jeremy - KB8LFA@qsl.net
KB8LFA - K2 #600

http://www.qsl.net/kb8lfa/

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of German
Sent: Tuesday, November 09, 1999 9:39 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: Pic Programmer 2 by JDM


NOPPP programmer is pretty straight forward.
If you decide to buid another simple programmer check
http://www.virtuaweb.com/picprog

> I have built the Pic Programmer 2 by JDM but it is not working.  I have
> built many circuits and have double/triple checked this.  I have a few
> questions that maybe somebody can answer.
>
> 1) Does this programmer work with JDM84 and PIP-02?
>
> 2) I have used 2N3906 transistors.  Is this a problem??
>
> 3) I have used 1N4007 for the non-zener diodes.  Is this OK??
>
> 4) I have used a 9v zener instead of 8.2v (Radio Shack had none).
Should
> this be OK??
>
> Thanks in advance.
>
> John Mullan
>
>
------------------------------------
netQ <netquake@innocent.com>
http://virtuaweb.com/picprog
"Home of amateur PIC programmers..."

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2

mQCNAzV38BkAAAEEALfWv9j3f+tZ+z2IW+2o9Ebx4bUGnHjHPqIe0a6yVKawaeV/
Y4I6L2/A0ddbVMG8+qJ0MvHNkr3DzYkpW+hTl9zAzXkKBdZ3GA5bbvot7entl/O2
YDtRWUV730koxBo5iFFUbJH5kbmkox+h3znj34zPnZNWzNaqOAwol3wABfBNAAUT
tBxOZXRRIDxuZXRxdWFrZUBpbm5vY2VudC5jb20+
=0bVU
-----END PGP PUBLIC KEY BLOCK-----