One thing to keep in mind in all of this discussion is that the IR spectrum is pretty wide. A regular CCD camera (without IR filter) is sensitive to the type of IR emitted by an IR LED,that is,near-IR. It is just below the frequency of visible red light and corresponds to a VERY hot object's emission (>1000 K, I think). This is NOT the same freq. of IR that is used by passive IR nightvision goggles, FLIR, heat-seeking missiles (just had to add this because I just finished playing Falcon 4.0, a GREAT combat flight sim),etc. That is in the multi-micrometer range,and is emitted by near room temp objects (as well as engines, people, animals, hot ground, etc.) These sensors are somewhat exotic because they often need to be cooled (especially if you want to pick up heat from animals,etc.,anything not much hotter than ambient) SO, if you want to make a passive night-vision IR scope, you will need special equipment that is sensitive to the middle region of the IR spectrum. If you want an active IR scope (with its own IR spotlight),then you can use a standard CCD and an IR led array. If you want a starlight scope, you need an image intensifier, which are available surplus (but I'm not sure of the price). Sean At 09:32 PM 11/5/99 -0500, you wrote: >ITT makes night vision goggles and camera attachments. They are starlight, not IR. TI makes good IR cameras with a video out that >can attach to a VCR. Do a search for Information Unlimited's site for homebrew IR image converters. > >Mike M wrote: > >> anyone have any links or ideas on how to build an infrared camera/nitevision attatchment to a regular video camera if possible??? >> >> Send someone a cool Dynamitemail flashcard greeting!! And get rewarded. >> GO AHEAD! http://cards.dynamitemail.com/index.php3?rid=fc-41 > | | Sean Breheny | Amateur Radio Callsign: KA3YXM | Electrical Engineering Student \--------------=---------------- Save lives, please look at http://www.all.org Personal page: http://www.people.cornell.edu/pages/shb7 mailto:shb7@cornell.edu ICQ #: 3329174