> I need to use a In Circuit Programme for a production circuit (PIC 16F84).
> The picstar plus isn't able to program because on RB6 and RB7 there is a
22
> pF capacity versus ground. This two component cut-off the programming
> signal (the programming clock of picstart plus is about 100KHz). I try the
> YAPP programmer (with 1KHz programming clock) but this is instable in In
> circuit programming mode.
> Some one can tell me if there is some programmer that is able to do this?
> I can buy a big programmer (as ProMate) but it must be able tu resolve
this
> problem.
> TIA.
>
> Alboni Giorgio

ProPic 2 ICP is perfect for this job, a in-circuit,
production mode programmer, details at http://www.propic2.com

Friendly Regards

Octavio Nogueira
===================================================
nogueira@propic2.com                  ICQ# 19841898
ProPic tools - low cost PIC programmer and emulator
http://www.propic2.com
===================================================