I need to use a In Circuit Programme for a production circuit (PIC 16F84).
The picstar plus isn't able to program because on RB6 and RB7 there is a 22
pF capacity versus ground. This two component cut-off the programming
signal (the programming clock of picstart plus is about 100KHz). I try the
YAPP programmer (with 1KHz programming clock) but this is instable in In
circuit programming mode.
Some one can tell me if there is some programmer that is able to do this?
I can buy a big programmer (as ProMate) but it must be able tu resolve this
problem.
TIA.

Alboni Giorgio

===================================================
Alboni Giorgio
Faenza (Ra) ITALY
E-Mail: rac1337@racine.ravenna.it

http://www.geocities.com/SiliconValley/Heights/5444
(Last Update: 15/03/1998)
===================================================