Hi Dave
Thank's for the tip and for the invitation.

Francisco

Dave VanHorn wrote:

> >I use ORCAD SDT RELEASE 4 whit ORCAD PCBII for DOS, for my designs of
> >PCB'S, i have some troubles when place zone ground, if i use grid size
> >less to 50 mils, the troubles is because the system memory is to small
> >for this procedure. I have noted that ORCAD for DOS used conventional
> >memory for allocate memory for routes, module, etc., my question is ?
> >how i can do, for ORCAD allocate memory higer that the conventional
> >memory?, ?it is possible?
>
> This may take some discussion, let me invite you to my dos-orcad group at
> egroups.com  I use it, so I thought it would be nice to set up a group for
> others as well.
>
> This should be working, I use 8 mil crosshatch on large-ish boards with no
> problem.

Content-Type: text/x-vcard; charset=us-ascii;
 name="briones.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Francisco Armenta
Content-Disposition: attachment;
 filename="briones.vcf"

Attachment converted: wonderland:briones.vcf 1 (TEXT/CSOm) (0000D461)