Randy . . . .
does this package have a decent * board-outline* capability  or the ability
to change the board outline as you make mods.  ?
Regards . . . 
                        Steve
-----Original Message-----
From: Randy A. <Cnc002@AOL.COM>
To: PICLIST@MITVMA.MIT.EDU <PICLIST@MITVMA.MIT.EDU>
Date: Friday, October 01, 1999 9:14 AM
Subject: PCB software


>It would appear that to get a decent PCB software package one is going to
>have to pay SOMETHING.  I use CircuitMaker and TraxMaker Pro myself.  The
>suite of software for both is around $1500.00 however you get unlimited
>everything pretty much.  You can easily create your own packages and
>schematic symbols the two work seamlessly with each other when designing and
>routing the PCB from an existing schematic drawn in CircuitMaker.  There is a
>less costly version, both would be around $600.00 total and these versions
>work just as well as the full Pro versions.  The only real difference is
>about 2000 less devices in the supplied library (it still has a ton of them)
>and the compatibility with other routers.  But, of course if you have the
>TraxMaker PCB software why worry about other routers.
>
>That is my $.02 worth on the subject.
>
>Randy A.
>