At 07:26 PM 9/27/99 +0100, Simon Redwood wrote:
>Reply To: "Simon Redwood" <spredwood@sri-net.demon.co.uk>
>X-Mailer: ELM [version 2.4ME+ PL37 (25)]
>MIME-Version: 1.0
>Content-Type: text/plain; charset=US-ASCII
>Content-Transfer-Encoding: 7bit
>Content-Length: 799
>
>
>> At 11:24 AM 9/27/99 +0200, Wojciech Zabolotny wrote:
>> >On Sun, Sep 26, 1999 at 05:43:23PM -0700, Robert M. McClure wrote:
>> Stuff omitted......
>> >
>> >What about http://mot-sps.com/lit/html/an1010.html ?
>> >
>>
>> That works too.
>>
>
>I have the above mentioned document, and have taken the A8 bootstrap
>program, which is what I beleive I need.  But I also need to execute my own
>few lines of code, to place a few values into EEPROM1, can these just be
>added at the bottom of the S19 file, or not ?
>
>There is only half a dozen values I want in the eeprom, through the serial
>interface.  Do I have to bootstrap and then upload another program or can I
>build it all in one ?
>
>

You have to bootstrap and then upload another program.

Bob McClure
>Regards,
>Simon
>
>{ ICQ#:         12229096                        }
>{ Email:        spredwood@sri-net.demon.co.uk   }
>{ Internet:     www.sri-net.demon.co.uk         }
>