> Octavio -
>
> When will yours be available and at what cost?
>
> Mike
>
Dear Mike and others,
The ProPic 2 ICD is available now and we have several
options, with or without the demo board, 18 pins and 8 pins
adapters, etc. take a look at http://www.propic2.com
to see the prices and to order on-line

Friendly Regards

Octavio Nogueira
===================================================
nogueira@propic2.com                  ICQ# 19841898
ProPic tools - low cost PIC programmer and emulator
http://www.propic2.com
===================================================
-----Mensagem Original-----
De: Mike Gann <mikegann@HOME.COM>
Para: <PICLIST@MITVMA.MIT.EDU>
Enviada em: S‡bado, Setembro 18, 1999 05:02
Assunto: Re: ICD Header erroneous - Warning



> Octavio Nogueira wrote:
> >
> > By ProPic 2 ICD instead, the Header is correct and it works
> > just like MPLAB-ICD.
> >
> > Friendly Regards
> >
> > Octavio Nogueira
> > ===================================================
> > nogueira@propic2.com                  ICQ# 19841898
> > ProPic tools - low cost PIC programmer and emulator
> > http://www.propic2.com
> > ===================================================
> > -----Mensagem Original-----
> > De: Morgan Olsson <morgans.rt@TELIA.COM>
> > Para: <PICLIST@MITVMA.MIT.EDU>
> > Enviada em: Sabado, Setembro 18, 1999 05:45
> > Assunto: ICD Header erroneous - Warning
> >
> > > Routing error in Microchip ICD header:
> > >
> > > F877 pin RD3 is connected to what should be the low voltage
programming
> > signal from the ICD Module !!!
> > >
> > > This really should be pin RB3 (LVP) pin.
> > >
> > > The revision number on my ISD header is 2.
> > >
> > > Strangely, the Demo board in th esame kit is correctly routed to the
place
> > for soldering in a connector.
> > >
> > > Obviously somebody typed wrong of B and D in a netlist or something.
> > > What is bad is they have not yet checked it and neither corrected or
> > reported this error.
> > > I have not seen a note of this anyway.
> > >
> > > The debugger is supposed to *find* bugs, not *be* a bug!!  :(
> > >
> > >
> > > I wonder, is this erroneous connection the reason why they say LVP
does
> > not work?
> > >
> > > Have somebody tried it out (with correct LVP connection) ?
> > >
> > > Regards
> > > /Morgan
> > > Morgans Reglerteknik, Hdllekes, 277 35 KIVIK, SWEDEN
> > >    tel +46(0)414-446620, fax -70331,   mrt@iname.com
> > >
>