I'm new to the list...
Can someone point me to a specific parallel port programmer I can make and
the software to match it?  I'm looking at programming a 16f84.
private email is GREAT! thanks!

Wes -  kd4rdb@qsl.net
  http://www.qsl.net/kd4rdb

Where am I?
   http://map.aprs.net/kd4rdb-9
   http://map.aprs.net/kd4rdb-10

Stupidity should be painful
-----Original Message-----
From: Harrison Cooper <hcooper@ES.COM>
To: PICLIST@mitvma.mit.edu <PICLIST@mitvma.mit.edu>
Date: Monday, September 20, 1999 5:09 PM
Subject: [OT] Source on a couple of power supplies


>hey list...just need to 'pic' the brain trust
>
>I'm looking for some inexpensive power supplies, that will be driving some
>linear actuators, so being real clean is not as important as if it was for
a
>computer or such.  Your basic...transformer, bridge cap and regulation
>
>24VDC @7amps continuous
>12VDC @11amps continuous
>
>The qty is someplace a total of 60 units(mix of both types), need to be as
>small as possible, and have 240VAC as the primary.
>
>I'm looking at either an off the shelf solution, or if someone in the
states
>wants to build em, contact me off line.  Its just one piece of a larger
>project that I don't have time to deal with.
>

________________________________________________________
NetZero - We believe in a FREE Internet.  Shouldn't you?
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html